Kelly Controller KLS7218S

Sinusoidal Controller for DC Brushless Hub Motor.
Suitable for 1200W, 1500W and 2000W motor.

General Specifications:
•Controller Support Voltage: DC 24V-72V (max. 90V).
•Motor Current Limit, 20 seconds boost: 200A ,depending on the model.
•Motor Current Limit, continuous: 80A ,depending on the model.
•Max Battery Current :Configurable.
•Frequency of Operation: 20kHz.
•Standby Battery Current: < 0.5mA.
•5V or 12V Sensor Supply Current: 40mA.
•Controller supply voltage range: PWR, 18V to 90V for controllers rated equal or lower than 72V.
•Supply Current, PWR, 30mA Typical.
•Configurable battery voltage range, B+. Max operating range: 18V to 1.25*Nominal Voltage.
•Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
•Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
•Main Contactor Coil Driver<2A.
•Full Power Operating Temperature Range: 0℃ to 70℃(MOSFET temperature).
•Operating Temper ature Range: -40℃to 100℃ (MOSFET temperature).